Get listed Shortlist
Home > Blog > SLS, MJF, SLA, FDM or Metal: Which 3D Printing Process Suits Your Part?

SLS, MJF, SLA, FDM or Metal: Which 3D Printing Process Suits Your Part?

Buyer Guides · 3 November 2026

Most 3D printing quotes name a process: SLS, MJF, SLA, FDM or a metal process. The name matters, because the process sets the surface finish, the strength, the level of detail and the materials available. This guide explains what each process does, where it fits, and how many of the 30 UK companies listed on 3DP Directory offer it.

FDM / FFF: extruded plastic

Fused deposition modelling (FDM, also called fused filament fabrication or FFF) melts a thermoplastic filament and lays it down layer by layer. It is widely available, runs in a broad range of materials, from ABS and ASA to polycarbonate and high-performance polymers such as ULTEM and PEEK, and is often the choice for functional prototypes, jigs and large parts. Layer lines are visible and strength differs by direction. 17 of the 30 listed companies offer FDM or FFF, and 10 offer large-format printing.

SLA and DLP: cured resin

Stereolithography (SLA) uses a laser to cure liquid photopolymer resin layer by layer, and digital light processing (DLP) cures a whole layer at once with a projector. Both produce fine detail and smooth surfaces, which suits master patterns, visual models and small precision parts. Resin parts can be more brittle than nylon, though engineering and tough resins narrow the gap. 14 companies listed offer SLA and 4 offer DLP.

SLS and MJF: polymer powder bed

Selective laser sintering (SLS) fuses nylon powder with a laser. Multi Jet Fusion (MJF) is HP's powder bed process, in which a printhead deposits fusing and detailing agents onto the powder and heat fuses it. In both, the unfused powder supports the part as it builds, so complex shapes and moving assemblies print without support structures. They are the usual choice for durable nylon parts in small production runs. 12 listed companies offer SLS and 8 offer MJF.

PolyJet: jetted photopolymer

PolyJet jets tiny droplets of photopolymer and cures them with UV light. It can combine materials of different hardness and colour in one part, which suits realistic prototypes, overmoulded-look parts and models. It is not usually the choice for load-bearing parts. 6 listed companies offer PolyJet.

Metal: powder bed and beyond

Laser powder bed fusion (LPBF, also called DMLS) melts metal powder layer by layer in a controlled atmosphere, producing dense metal parts in stainless steel, aluminium, titanium and nickel superalloys. The parts usually need support structures, stress relief and removal from the build plate, and often machining on critical surfaces. Other metal routes include binder jetting and directed energy deposition, including wire arc additive manufacturing (WAAM), which suits larger parts. 7 companies listed offer LPBF or DMLS. On materials, 9 list stainless steel, 7 aluminium, 6 titanium and 6 Inconel or other superalloys.

Materials worked by UK 3D printing companies listed on 3DP Directory

Quick comparison

Process Typical strengths Watch for
FDM / FFF Wide material choice, large parts, low cost Visible layers, strength differs by direction
SLA / DLP Fine detail, smooth surface Brittleness, post-curing and support marks
SLS / MJF Durable nylon parts, no supports Grainy surface unless finished
PolyJet Multi-material and colour Lower strength, limited durability
Metal LPBF / DMLS Dense metal parts, complex geometry Supports, stress relief, machining of critical faces

Related services to look for

Many bureaus offer more than printing. Among the listed companies, 18 offer reverse engineering, 16 design / cad, 12 cnc machining and 11 3d scanning. A bureau that can scan, redesign and machine as well as print can take a part from sample to finished component without handing it between suppliers. If your part is machined as well as printed, CNC Directory lists UK machining companies.

Services UK 3D printing companies list alongside printing

How to choose

Start with what the part must do, then work back to the process. A visual model points to SLA or PolyJet. A functional nylon part in the tens or hundreds points to SLS or MJF. A large, low-cost prototype points to FDM. A metal part that must carry load points to a metal process. Then check the material grade, the finish and the inspection you need. Our guide to choosing a UK 3D printing service covers those questions.

Figures come from 3DP Directory listings as of November 2026 and reflect what each company states in its public information. They are not independently audited.

Where to go for more

The Manufacturing Technology Centre is the UK's national additive manufacturing centre. The international standards body ISO publishes ISO/ASTM 52900, which defines the terminology of additive manufacturing, including the process categories above.

Find 3D printing companies on 3DP Directory

Browse by process: polymer powder bed (SLS and MJF), resin printing (SLA and DLP), FDM and FFF, PolyJet, large-format printing and metal 3D printing. Save the companies that fit to your shortlist and send one enquiry to the whole shortlist at once.

Figures and data in this article are drawn from 3DP Directory's own dataset of UK 3D printing listings, and may be cited with attribution to 3DP Directory and a link to this article.

For press enquiries about 3DP Directory, contact 3dp@3dpdirectory.co.uk.

Listings related to this article

3D Print Bureau logo

3D Print Bureau

Stoke-on-Trent, Staffordshire

New

3D Print Bureau is an industrial 3D printing service in Longton, Stoke-on-Trent, and part of Tri-Tech Engineering Limited. In-house processes include Stratasys FDM with a build area up to 1000 x 610 x 610 mm, SLA up to 800 x 800 x 600 mm, PolyJet multi-material printing, Stratasys Origin One DLP, MJF nylon and One Click Metal laser powder bed fusion. Materials include ULTEM 9085 and 1010, Antero PEKK, ABS, ASA, PC, PLA, carbon-fibre nylon, TPU 92A, PA12 and PA11, Somos resins, 316L stainless steel, aluminium and tool steel. It serves automotive, aerospace, medical, industrial and consumer goods customers, from single parts to short production runs.

  • FDM/FFF
  • SLA
  • PolyJet
  • DLP
AME-3D logo

AME-3D

Dinnington, South Yorkshire

New

AME-3D is a 3D printing, product design and low-volume manufacturing company based at Momentum House in Dinnington, Sheffield, South Yorkshire. It runs SLA, SLS, MJF, FDM and LCD 3D printing alongside vacuum casting and RIM moulding, with an in-house design team offering CAD design, design for manufacture and reverse engineering. Materials include PA11 and PA12 nylon, glass-filled nylon, TPU, ABS, PETG and PLA, and parts can be sanded, primed, painted, dyed, bead blasted or vapour smoothed. The company is ISO 9001:2015 certified and works with automotive, medical, aerospace, defence, subsea, consumer product, film and TV and industrial customers.

  • SLA
  • SLS
  • MJF
  • FDM/FFF
ARRK Europe logo

ARRK Europe

Gloucester, Gloucestershire

New

ARRK Europe runs an additive manufacturing centre in Quedgeley, Gloucester, producing prototypes and low-volume parts by SLA, SLS, HP MJF, DLP, PolyJet and continuous fibre printing. Materials include PA11 and PA12 nylon, TPU, tough and biocompatible DLP resins, and carbon fibre composites. Alongside printing it offers vacuum casting, CNC machining, 3D scanning and reverse engineering, with DyeMansion dyeing, AMT vapour smoothing, spray painting and electroforming. The Gloucester site holds ISO 9001 and ISO 14001, and the company is JOSCAR registered and Cyber Essentials certified. It serves defence, aerospace, automotive, medical and consumer products sectors.

  • SLA
  • SLS
  • MJF
  • DLP
CA Models logo

CA Models

Stirling, Stirling

New

CA Models is a rapid prototyping and precision engineering company at Springkerse Industrial Estate, Stirling, established in 1983. It runs SLA, SLS, FDM, PolyJet and metal laser sintering (DMLS) in-house, alongside 5-axis CNC milling, turning, wire erosion, vacuum casting and a model shop. Materials include AlSi10Mg aluminium, 316L stainless steel, Ti6Al4V titanium, nylon, glass-filled nylon and Carbonmide, with in-house spray painting, CMM inspection and 3D scanning. The company holds ISO 9001 and Cyber Essentials, is JOSCAR registered, and works with aerospace, defence, automotive, Formula 1, medical device and oil and gas customers.

  • SLA
  • SLS
  • FDM/FFF
  • PolyJet
Fuseworx logo

Fuseworx

Arlingham, Gloucestershire

New

Fuseworx is a 3D printing and engineering business in Arlingham, Gloucestershire, offering SLS, SLA and FDM printing alongside CAD design and reverse engineering. Its FDM capacity runs ten Bambu Lab X1C printers in PLA, ABS, PETG, TPU and nylon, while SLS parts are built in PA12 nylon and SLA parts in standard and tough resins. Large-format FDM printing and AMT PostPro vapour smoothing are also offered. Work covers rapid prototypes, functional end-use parts and small batches, including SLS nylon components for drone and UAV manufacturers.

  • SLS
  • SLA
  • FDM/FFF
  • Large-Format Printing
Laser Prototypes Europe logo

Laser Prototypes Europe

Belfast, County Down

New

Laser Prototypes Europe (LPE) is a 3D printing and rapid prototyping bureau in Belfast, Northern Ireland, established in 1991. In-house processes include SLA, SLS, DLP and metal printing (DMLS) in titanium, aluminium, stainless steel, maraging steel and Inconel, alongside vacuum casting, 3- and 5-axis CNC machining and 3D scanning. The company holds ISO 9001, ISO 13485 and AS9100 certification and can supply first article inspection reports, CMM reports and material traceability for low-volume production. It serves medical, aerospace, defence, automotive, motorsport, consumer goods, film and architecture customers.

  • SLS
  • SLA
  • DLP
  • Metal LPBF/DMLS
Lunia 3D logo

Lunia 3D

Cardiff, Cardiff

New

Lunia 3D is a 3D printing service in Cardiff, Wales, with HP Multi Jet Fusion as its main production process alongside FDM, large-format FDM and SLA resin printing. Materials include PA12 nylon, carbon- and glass-filled nylons, TPU, ABS, ASA, PETG, PLA and polycarbonate, with standard, tough and flexible resins for SLA. The company also offers CAD modelling, support removal, painting and dyeing, and handles single parts through to batch production, with work for sectors including automotive and architectural models.

  • MJF
  • FDM/FFF
  • SLA
  • Large-Format Printing
Midlands 3D Printing logo

Midlands 3D Printing

Stone, Staffordshire

New

Midlands 3D Printing is a 3D print manufacturer in Stone, Staffordshire, running HP Multi Jet Fusion production around the clock alongside a large FDM print farm, industrial FFF, SLS TPU and SLA. Materials range from PA11 and PA12 nylon, TPU, PETG and ABS to PEEK and ULTEM, with DeepDye colouring, vapour smoothing, painting, threaded inserts and PPAP inspection available in-house. The company holds ISO 9001, ISO 14001 and Cyber Essentials Plus certification, is JOSCAR registered, and supplies prototypes through to batch production for automotive, motorsport, defence, healthcare, marine, consumer products and media customers.

  • MJF
  • SLS
  • FDM/FFF
  • SLA
Paragon Rapid Technologies logo

Paragon Rapid Technologies

Darlington, Durham

New

Paragon Rapid Technologies is a prototyping and low-to-mid volume manufacturer based at Teesside International Airport, Darlington, County Durham. In-house 3D printing covers large-bed SLA with an 800 x 800 x 600 mm build size, SLS, HP Multi Jet Fusion and Carbon DLS, alongside vacuum casting, RIM moulding, CNC milling and turning, model making and CAD and reverse engineering support. The company is ISO 9001 certified and works across aerospace, defence, automotive, motorsport, medical, marine, energy, consumer products, industrial and film and television projects.

  • SLA
  • SLS
  • MJF
  • Large-Format Printing
SGD 3D logo

SGD 3D

Nottingham, Nottinghamshire

New

SGD 3D is a 3D printing service in Bulwell, Nottingham, Nottinghamshire, producing FDM, SLA and SLS parts for prototypes and low-volume production. Materials include glass-filled PA12 nylon on SLS, Formlabs standard and engineering resins, and FDM materials from PLA, PETG, ABS, ASA and TPU to polycarbonate, ULTEM and PEEK, including fire-retardant grades. The company holds ISO 9001 certification and offers CAD design, 3D scanning, reverse engineering, vapour smoothing and first article inspection reports for aerospace, defence, automotive, rail and industrial customers.

  • FDM/FFF
  • SLA
  • SLS
  • Design/CAD
WeDo3DPrinting (We Do Retail Ltd) logo

WeDo3DPrinting (We Do Retail Ltd)

Sheffield, South Yorkshire

New

WeDo3DPrinting is a 3D printing and design service in Sheffield, run as a division of We Do Retail Ltd. It runs a print farm of over 50 machines, including large-format FDM printers that build parts over 1 metre, alongside SLA and SLS printing. FDM materials include PLA, ABS, ASA, PETG, polycarbonate and TPU, with nylon for SLS. Services cover CAD design, 3D scanning and reverse engineering of obsolete parts, plus 3-, 4- and 5-axis CNC machining and laser cutting. Work ranges from express single prototypes to batch production runs, and architectural models.

  • FDM/FFF
  • SLA
  • SLS
  • Large-Format Printing