Get listed Shortlist
Home > Blog > AS9100, ISO 13485 and ISO 9001 for 3D Printing: What UK Buyers Can Ask For

AS9100, ISO 13485 and ISO 9001 for 3D Printing: What UK Buyers Can Ask For

Buyer Guides · 3 November 2026

Aerospace and medical buyers often ask a 3D printing supplier for a certificate before they ask for a price. The certificates people mention most are ISO 9001, AS9100 and ISO 13485, and they are not interchangeable. This guide explains what each one covers, how to read the scope, and how many of the 30 UK 3D printing companies listed on 3DP Directory state them.

What each certificate covers

ISO 9001 is the general quality management standard. It shows that a company runs a documented, audited system for managing its work, and it applies to any sector. 14 of the 30 listed companies hold it.

AS9100 is the quality management standard for the aerospace, space and defence sector. It builds on ISO 9001 with extra requirements for areas such as configuration management, risk and product safety. AS9100 is stated by 2 of the 30 listed companies.

ISO 13485 is the quality management standard for medical devices. It adds requirements for design controls, traceability and regulatory compliance. ISO 13485 is stated by 1 of the 30 listed companies.

ISO 14001 (environmental management) is held by 5 listed companies and ISO 45001 (occupational health and safety) by 1.

Cyber Essentials and JOSCAR

Two other entries appear often in supplier files. Cyber Essentials is a UK government-backed scheme for basic cyber security, run by the National Cyber Security Centre, and 10 listed companies hold it. It matters if your drawings and models are confidential or if your customer's contract requires it. JOSCAR is a supplier register used by the aerospace, defence and security sector to pre-qualify suppliers, and 7 listed companies are registered. It is a register, not a quality standard, so check what your customer requires.

Certifications and registrations stated by UK 3D printing companies listed on 3DP Directory

Read the scope, not just the logo

A certificate has a scope statement that says which activities and sites it covers. A company can hold ISO 9001 for one site or one service and not another. Before you rely on a certificate, ask for a copy and check that:

  • the scope includes additive manufacturing or the activity you are buying
  • the certificate covers the site that will make your parts
  • the certificate is in date
  • the certification body is accredited, which you can check with UKAS

Which certificate does your sector expect?

Aerospace and defence buyers generally expect AS9100 or a supplier approved under their own scheme, medical device makers expect ISO 13485 or a documented supplier qualification, and most other sectors accept ISO 9001. Your customer's purchase terms or supplier quality manual say which applies, so ask them before you shortlist. On 3DP Directory, 21 of the 30 listed companies serve aerospace and defence, 19 automotive and 16 medical.

Sectors served by UK 3D printing companies listed on 3DP Directory

Process-specific standards

A general quality certificate does not describe how a company controls an additive process. ISO/ASTM 52920 sets requirements for qualifying industrial additive manufacturing processes and production sites, and it is written to sit alongside quality management standards such as ISO 9001, AS9100 and ISO 13485. If your part is safety-critical, ask a supplier how it controls build preparation, powder and material handling, machine calibration, and post-processing, and whether it works to this standard.

If no listed company holds the certificate you need

Few UK 3D printing companies hold AS9100 or ISO 13485 compared with ISO 9001, so you may have to widen the search. Options include asking a certified supplier to manage a non-certified bureau under its own system, qualifying the bureau directly through a supplier audit, or splitting the work so that the controlled steps (inspection, certification, final release) sit with a certified company.

Quick-reference checklist

  • Ask your customer which certificate or approval is required
  • Ask the bureau for a copy of the certificate and read the scope
  • Check the site, the activity and the expiry date
  • Check the certification body with UKAS
  • Ask what process controls apply to additive builds, beyond the general certificate
  • Ask for material certificates and inspection reports with each order

Figures come from 3DP Directory listings as of November 2026 and reflect what each company states in its public information. They are not independently audited.

Where to go for more

UKAS is the UK's national accreditation body. The National Cyber Security Centre explains Cyber Essentials. Achilles runs JOSCAR for the aerospace, defence and security sector.

Find certified 3D printing companies on 3DP Directory

Browse UK 3D printing companies and filter by Certification and Sector. Save the companies that fit to your shortlist, compare their certifications side by side, and send one enquiry to your whole shortlist. Our guide to choosing a UK 3D printing service covers the wider questions to ask.

Figures and data in this article are drawn from 3DP Directory's own dataset of UK 3D printing listings, and may be cited with attribution to 3DP Directory and a link to this article.

For press enquiries about 3DP Directory, contact 3dp@3dpdirectory.co.uk.

Listings related to this article

3DPRINTUK logo

3DPRINTUK

London, Greater London

New

3DPRINTUK is a 3D printing bureau in Leyton, London, producing nylon parts on in-house SLS, MJF and SAF machines for prototypes, batch production and large production runs. Materials include PA12 and PA11 nylon and flexible TPU, with finishes including bead blasting, vibro-polishing, vapour smoothing and colour dyeing. The company holds ISO 9001 and ISO 14001, is JOSCAR registered, and supplies aerospace, defence, marine and medical customers.

  • SLS
  • MJF
ARRK Europe logo

ARRK Europe

Gloucester, Gloucestershire

New

ARRK Europe runs an additive manufacturing centre in Quedgeley, Gloucester, producing prototypes and low-volume parts by SLA, SLS, HP MJF, DLP, PolyJet and continuous fibre printing. Materials include PA11 and PA12 nylon, TPU, tough and biocompatible DLP resins, and carbon fibre composites. Alongside printing it offers vacuum casting, CNC machining, 3D scanning and reverse engineering, with DyeMansion dyeing, AMT vapour smoothing, spray painting and electroforming. The Gloucester site holds ISO 9001 and ISO 14001, and the company is JOSCAR registered and Cyber Essentials certified. It serves defence, aerospace, automotive, medical and consumer products sectors.

  • SLA
  • SLS
  • MJF
  • DLP
CA Models logo

CA Models

Stirling, Stirling

New

CA Models is a rapid prototyping and precision engineering company at Springkerse Industrial Estate, Stirling, established in 1983. It runs SLA, SLS, FDM, PolyJet and metal laser sintering (DMLS) in-house, alongside 5-axis CNC milling, turning, wire erosion, vacuum casting and a model shop. Materials include AlSi10Mg aluminium, 316L stainless steel, Ti6Al4V titanium, nylon, glass-filled nylon and Carbonmide, with in-house spray painting, CMM inspection and 3D scanning. The company holds ISO 9001 and Cyber Essentials, is JOSCAR registered, and works with aerospace, defence, automotive, Formula 1, medical device and oil and gas customers.

  • SLA
  • SLS
  • FDM/FFF
  • PolyJet
DEEP Manufacturing (DEEP Research Labs) logo

DEEP Manufacturing (DEEP Research Labs)

Bristol

New

DEEP Manufacturing produces large metal components in Avonmouth, Bristol, using Wire Arc Additive Manufacturing (WAAM). Its 34,000 sq ft facility runs 17 robotic WAAM systems, with single-arm builds up to 3 metres in diameter and multi-robot builds up to 6.2 metres. Materials include carbon steels, 316L and super duplex stainless steels, nickel aluminium bronze, CuNi30, 2319 aluminium and Inconel 625. In-house 5-axis CNC machining, inspection and material certification complete the parts. The company holds ISO 9001, ISO 14001, ISO 45001, Cyber Essentials Plus, JOSCAR registration and DNV Approval of Manufacture for WAAM, and serves energy, maritime, subsea, defence and aerospace customers.

  • WAAM/DED
  • Large-Format Printing
  • CNC Machining
  • Reverse Engineering
Laser Prototypes Europe logo

Laser Prototypes Europe

Belfast, County Down

New

Laser Prototypes Europe (LPE) is a 3D printing and rapid prototyping bureau in Belfast, Northern Ireland, established in 1991. In-house processes include SLA, SLS, DLP and metal printing (DMLS) in titanium, aluminium, stainless steel, maraging steel and Inconel, alongside vacuum casting, 3- and 5-axis CNC machining and 3D scanning. The company holds ISO 9001, ISO 13485 and AS9100 certification and can supply first article inspection reports, CMM reports and material traceability for low-volume production. It serves medical, aerospace, defence, automotive, motorsport, consumer goods, film and architecture customers.

  • SLS
  • SLA
  • DLP
  • Metal LPBF/DMLS
Midlands 3D Printing logo

Midlands 3D Printing

Stone, Staffordshire

New

Midlands 3D Printing is a 3D print manufacturer in Stone, Staffordshire, running HP Multi Jet Fusion production around the clock alongside a large FDM print farm, industrial FFF, SLS TPU and SLA. Materials range from PA11 and PA12 nylon, TPU, PETG and ABS to PEEK and ULTEM, with DeepDye colouring, vapour smoothing, painting, threaded inserts and PPAP inspection available in-house. The company holds ISO 9001, ISO 14001 and Cyber Essentials Plus certification, is JOSCAR registered, and supplies prototypes through to batch production for automotive, motorsport, defence, healthcare, marine, consumer products and media customers.

  • MJF
  • SLS
  • FDM/FFF
  • SLA